PRODUCTS
OIL/GAS
Well Site Automation
This solution is completely scalable and can integrate with your existing operation. A Site Monitor is placed at the well site and collects data from Equipment Monitors placed at each instrument. It then relays that information to the office via existing radios, cellular, satellite or wifi. Each Equipment Monitor is configured to receive data from various instruments such as an EFM, tank levels, pressure, etc. Click here for brochure.
EFM Monitoring
This product is part of the Well Site Automation solution. It is designed to quickly install in the field and collect needed data from an EFM. It is especially suited for Pipeline monitoring that covers varied geographic areas requiring different communications methods such as radio, cellular, satellite. Click here for brochure.
Pen Chart Recorder System
The patent pending Advantis system monitors gas production using existing circular chart recorders. It integrates the chart real time using AGA no. 3 formulas and sends the information to the customer via satellite. The system can be installed by an instrument technician in two hours and can start monitoring immediately for: daily or hourly gas flow; average pressure, flow, temperature, and extension; alarms for no flow; other - custom programming. Click here for 'Keep the chart' brochure OR 'Pen Chart Recorder' System brochure.
MUNICIPAL
PumpScout - Lift/Pump Station monitoring
PumpScout and the Web application that comes with it bring peace of mind to you the wastewater or fresh water operator. It informs you immediately of any alarms (high level, breaker trip, pump failure, and loss of power to name a few) via cell, voice, or email. It also sends to the web app operational information like pump run times, number of starts, and average amps for the motors. You can sign-in to the web app and access all information about each lift/pump station.
PumpScout is the Advantis flagship product. It comes in three levels: Cub, Explorer, and Eagle (See Features Comparison Table). The Cub is entry level whereas the Eagle has a large feature set including remote control. PumpScout uses a combination of current sensors and relays to capture large amounts of information about how your pump station is performing. PumpScout communicates via satellite or cellular (GSM or CDMA major carriers). Click here for brochure
GeneratorScout - Generator Monitoring
The Generator Scout is another reliable product from the PumpScout family. It uses the same proven hardware and web application but is programmed specifically to meet the needs for Generator Monitoring. It is simple to install yet has flexibility for the user to choose what alarms are important to them. Alarms are immediate and can be sent to email and text on phone. Daily reports capture operational information like run time. The unit is standard with 6 Digital in and 3 Analog in. Click here for brochure
Emergency Siren Monitor
This monitoring system brings new life to the old manual or radio controlled emergency siren or warning systems. Within two hours of installation, sirens can be turned on/off using a cell phone. The Web application captures all alarms as well as operational information. Alarms such as 'loss of power' go directly to your cell phone.
GENERAL AND CUSTOM
PLC Monitoring System
This product allows you to easily capture information that is tied up inside your PLC. This unit can be plugged into any existing control system and relay information to the web application. This is very useful for existing equipment that has all the controls built in, but was never designed for remote monitoring. Works on any PLC with a serial port. Click here for brochure
Custom Monitor System
Often you may have a piece of equipment in the field that you would like to monitor but does not fall into the above solutions. Or, you may need a whole solution to a problem. The PumpScout system is so adaptable with I/O and multiple communication methods that, in many cases, it can be 'tweaked' to meet your specific need. Please call to discuss options.
Other Accessories
Current Sensors
Advantis manufactures its own line of current sensors using Honeywell CSLA series linear current sensors. Standard ranges are: 50 Amp, 100 Amp, and 150 Amp. Call for availability.
Rain Gauge
Advantis partners with a company that has been making weather instruments for over 25 years. We offer a rugged and reliable tipping bucket of various styles and accessories to meet all weather conditions.
Level Sensor
Advantis offers a standard 4-20 mA level sensor. PumpScout is designed to receive a signal from many different industrial sensors.
Phase Monitor
Advantis offers a standard industrial phase monitor. Although PumpScout will work with many, by using our model we keep it simple by giving specific setup instructions.